Blaze Subxero from Atom Vapes
The Blaze Subxero is just $40.00, and what you get for that $40.00 is the following:
Blaze Subxero from Atom Vapes
- 1x Blaze Sub Ohm 900mAh Pass-Through Battery
- 1x Inferno Sub Ohm Tank
- 1x Ignite 0.5Ω Coil
- 1x Ignite 1.2Ω Coil
- 1x Micro USB Charger
- 1x Microfiber Liquid Cloth
- 3x Vinyl Waterproof Blaze Skinz
- 2x User Manuals
1x FREE 30ml E-Liquid included with purchase
The tank comes with a 0.5-ohm and a 1.2-ohm coil head that look, and work, like many of the tanks we’ve reviewed that sell for $30 by itself. A pack of 4 coils will cost you $12.99, about the same price as any other subohm coil. Yet, the “tank” is shaped more like an ordinary clearomizer, and the coils are made to provide a nice heavy “mouth to lung” experience, not lung hits.
Performance
I certainly didn’t expect much flavor or vapor from either unit in this review, but as it turned out the vape was much more than I could have hoped for. The flavor was true and the vapor was plentiful for a mouth-to-lung vaper.The negative of this device and the one I’ll review below is the battery capacity. 900mAh isn’t bad for a Spinner-like battery, but when you put a subohm coil on it the battery is going to drain fairly quickly. I was able to get about 3 hours of vaping before I had to recharge it. 900mAh just doesn’t cut for me, a vaper that will go through 4 or 5 2600mAh 18650 batteries a day. But for vapers that are vaping in order to stop smoking the combination is excellent. This kit delivers strong flavor, plenty of vapor, and with moderate vaping, decent battery life.
I would recommend the Blaze Subxero to any new vaper wanting to get a lot more than what a cig-a-like can deliver, but who doesn’t want to spend a lot of money to get it. On a scale of 1-5, 5 meaning a fantastic product and 1 being a product I wouldn’t even give away, I rate the Blaze Subxero a solid 4. With a 1300mAh and a rounded drip tip I would have given it the full 5.
Full Specs:
WEIGHT & DIMENSIONS | ||
Assembled Dimensions | 166mm x 14mmØ / Weight: 56g | |
Packaging Dimensions | 31mm x 81mm x 154mm / T.Weight: 157.2g | |
TECHNICAL | ||
Chip Board | OCX-100 | |
Voltage | 3.7v rechargeable battery | |
Battery Capacity | 900 mAh | |
Battery Indicator | Orange = 100%, Blue = 50%, Red = 10% | |
Charger | 4.2v 420mAh Pass through bottom connection | |
Recharge Time | 2-3 hours | |
Recharge Cycle | 300 times | |
On/Off | Lock/Unlock the device by pressing the fire button 5 times within 2 seconds | |
AirFlow System | BreatheTek technology variable airflow tank | |
Thread | 510/eGo thread | |
Connecting Pin | Spring loaded copper connection | |
Resistance | 0.5Ω – 3Ω | |
Materials | German Polycarbonate tank, gun metal electroplated copper components | |
Liquid Capacity | 2ml | |
Coil | Replaceable bottom vertical coil, US kanthal wire, Japanese organic cotton, ThrottleTek variable liquid flow | |
PROTECTION FEATURES | ||
Over Charge Protection | System auto shutdown if charged beyond 4.25v | |
Over Discharge Protection | If the battery drops below 3.2v, the fire button will flash red, and the battery will auto shutdown | |
Atomizer Protection | In case of atomizer short circuit, the battery fire button will flash red, the device will then auto shutdown | |
Charger Protection | In case of charging short circuit, the fire button will flash red, the device will then auto shutdown | |
Power Surge Protection | Chipset auto adjusts voltage during power surge | |
Battery Venting Protection | 2 heat vents located at the bottom of the battery | |
Low Resistance Protection | Battery enters sleep mode when the resistance of the atomizer is lower than 0.5Ω. The fire button will flash red | |
Over Heat Protection | Battery will auto sleep on inhalation over 10 seconds. LED on fire button will flash red | |
COLOR | ||
Color | Black |
Comments
Post a Comment